GTA 6 Best Settings: Motion Blur, Aim Assist, Subtitles and More

Contents
  1. Quick table: change these first
  2. Picture settings
  3. Comfort settings

You won’t be picking a graphics mode in GTA 6: the PS5 Display menu has no Quality or Performance option and no frame rate toggle. What actually changes the picture is motion blur, brightness calibration and your HDR setup. The rest of the useful options are about comfort: the control scheme, aim assist, stick dead zones, subtitles and the minimap.

The most detailed list of menu options with their defaults comes from ViceManual, which photographed the tabs on its own PS5 on launch night and is still adding the last few. The settings guides from Destructoid and iGeeksBlog use the same option names and confirm some of the defaults: motion blur at 3, Small UI text, the camera values. Where a default comes from ViceManual alone, we say so. We haven’t checked them in the game ourselves. None of our sources has described the Xbox menu separately.

To get there, press Options and pick Settings. You flip through the tabs with L1 and R1: Control Scheme, Controller, Gameplay, Display, UI, Camera, Audio and Account.

Quick table: change these first

Option Tab Default Recommendation
Motion Blur Strength Display 3 0 for the sharpest image (BGR) or 1–2 for smoother camera turns (ViceManual)
Subtitles UI Mission Only All Dialogue if you want subtitles outside missions too (iGeeksBlog)
Size (subtitles) UI Small one step up if the TV is across the room (ViceManual)
Background (subtitles) UI Off on, since white text gets lost against bright skies (ViceManual)
Speaker Names UI Off on, so you know who’s talking (ViceManual)
Control Scheme Control Scheme Default Classic if GTA 5 is in your muscle memory (GameRant, iGeeksBlog)
Targeting Gameplay Partial Lock-On for a relaxed game, Free Aim for a challenge (GameRant)
Deadzone (Left/Right Stick) Controller 4 lower if the sticks feel sluggish (Reddit via TechRadar), higher if they drift (ViceManual)
Units of Measurement UI Imperial, 12 Hour switch to metric and 24-hour if you prefer

The default of 3 for motion blur is confirmed by both ViceManual and iGeeksBlog. The subtitle, dead zone and units defaults come from ViceManual alone.

Picture settings

No modes: the console picks the resolution

ViceManual counted twelve options in the Display tab, and none of them switches between quality and performance. That lines up with what Rockstar told Wccftech: the game targets 30 frames per second on this generation of hardware. Each console gets a fixed setup:

Console Base resolution Output Upscaling
PS5 1440p 4K Rockstar’s in-house TAA
PS5 Pro 1440p 4K PSSR2
Xbox Series X 1440p 4K Rockstar’s in-house TAA
Xbox Series S 720p 1080p AMD FSR 4

So on PS5, PS5 Pro, Series X and Series S there’s nothing to switch in the game itself. Digital Foundry’s measurements and the gap between the base PS5 and the Pro are covered in our story on resolution and FPS on every console. If you’re still deciding on hardware, see whether the PS5 Pro is worth it for GTA 6.

Motion blur

Motion Blur Strength is a slider in Display that starts at 3 and goes down to 0. BGR suggests switching it off entirely: the game already leans hard on depth of field, and with strong blur on top, detail smears when you drive fast or swing the camera. The same writer admits that at 30fps a little blur makes camera movement feel smoother. ViceManual goes for the middle ground of 1 or 2.

TechRadar’s launch day live blog expects this to be one of the first debates among players. Some Reddit posters say to disable blur, others say it’s essential on OLED TVs. Our suggestion: try 1, take a drive through the city and watch how the camera behaves on turns.

Film grain, aberration, vignette and field of view

ViceManual’s list of Display options has no separate film grain, chromatic aberration or depth of field setting. You can’t turn off the darkened screen corners either. Rockstar’s Vice President of Dynamic Art, Michael Kane, told Wccftech the vignette is an artistic choice and there’s no toggle for it. He added that the studio fixed a bug that sometimes made the effect stronger than intended.

ViceManual didn’t find a field of view slider in the Camera tab, though it notes it hasn’t covered the whole tab. The closest thing is Height (On Foot) and Height (All Vehicles), with three camera heights each. A higher camera shows more of the street.

HDR and brightness

Brightness Calibration in Display brings up the same barely-visible-symbol screen you see on first launch. For HDR the game has a separate calibration screen called Max Brightness, which Matt Bolton flagged in TechRadar’s live blog, pointing to TV expert Vincent Teoh. Teoh warns that a TV’s own HDR processing can leave the image looking washed out. The specific TV setting he recommends changing is in an embedded post that we didn’t open, and TechRadar’s text doesn’t name it.

Other Display options, per ViceManual: Brightness Reduction softens bright lights in the world without dimming the HUD, Flashbang has two options, Blood & Gore Intensity and Dismemberment handle the gore, and three effect intensity sliders sit at 5 (Destructoid also has them at 5 in its recommended setup). iGeeksBlog confirms three blood levels and a dismemberment toggle.

Comfort settings

Classic: GTA 5-style controls

The default scheme puts sprint on L3 and moves jump to X/A, as both GameRant and GamesRadar+ point out. To get the old layout back:

  1. Press Options and open Settings.
  2. On the first tab, Control Scheme, use the D-pad to switch from Default to Classic.
  3. Back out with Circle and hold X to save (GameRant’s steps).
Button Classic action
X/A sprint
Circle/B melee
Square/X jump and climb
L3 crouch

Everything else stays the same, according to GameRant.

Aiming

Combat options sit under Gameplay → Combat. Targeting has three modes. As GameRant explains, Lock-On snaps to a target near your reticle, Partial slows the reticle down as it passes a target, and Free Aim turns aim assist off. Even in Free Aim, Shooting Assist still grabs nearby targets, so switch it off separately if you want no help at all. ViceManual lists Partial with an Aim Assist Strength of 4 as the default.

Option Relaxed Challenge
Targeting Lock-On Free Aim
Aim Assist Strength 3 0
Lock-On Time 5 —
Shooting Assist On Off
Drive-By Assist On Off
Quick Draw On On

Both presets are GameRant’s. The writer suggests maxing Lock-On Time if you struggle with moving targets. For an even harder game, set Reticle Shape to None in the UI tab and play without a crosshair.

GTA 6 has no difficulty settings, GameSpot confirmed. The Gameplay tab has Accessible Combat and Reduced Vehicle Damage instead (ViceManual, iGeeksBlog); the game warns the latter shifts the balance a lot, according to ViceManual.

Sensitivity, dead zones and DualSense

In the Controller tab, according to ViceManual alone, Horizontal Look Sensitivity starts at 6, while vertical look, both aim sensitivities and the two acceleration sliders start at 7. Aim Response Curve has four options and defaults to Standard.

Both stick dead zones default to 4, per ViceManual. TechRadar’s live blog relays Reddit comments saying that’s too big and the sticks feel sluggish, so try lowering it. If your sticks drift, ViceManual suggests raising it a step or two.

According to ViceManual, the DualSense features are all on by default: Vibration & Haptics Strength at 10, Adaptive Triggers Resistance, Adaptive Triggers Vibration and Light Bar Effect. The standout is Adaptive Speed Limiter: rest R2 at the trigger’s resistance point and the car holds a sensible speed for the road. If the triggers tire your hands, iGeeksBlog suggests turning down Adaptive Triggers Resistance. None of our sources describes how these options look on an Xbox controller.

Vehicle camera and cinematic shots

For driving, the Camera tab has Height (All Vehicles), follow speed sliders for how fast the camera swings back behind the car, and Follow Delay (Driver), which defaults to 0. Camera Shake rattles the view when you run or crash, and Camera Bob sits at 10; Destructoid lists the same defaults. If camera movement makes you queasy, ViceManual suggests trying the Follow Roll settings first, while iGeeksBlog recommends switching Camera Shake off and lowering Camera Bob.

Cinematic Kill Shot Frequency and Cinematic Vehicle Crash Frequency (both at 3) control how often a kill or a crash cuts to a cinematic angle. Turn both down if that breaks your flow. Gameplay also has Auto Drive and Auto Equip Helmet, which puts a helmet on when you get on a motorcycle.

HUD, minimap and units

The default Dynamic HUD hides the minimap, your money, health and stamina until you press down on the D-pad, GamesRadar+ notes, and each of those can be toggled. In the UI tab, per ViceManual, Minimap has three modes, alongside Minimap Size and Compass, while UI Text Size (Small by default, four sizes, which iGeeksBlog confirms) scales text, icons and prompts. At the bottom of the tab, Units of Measurement switches miles, pounds, Fahrenheit and the 12-hour clock to kilometres, kilograms, Celsius and 24-hour time.

Subtitles and accessibility

Subtitles show only during missions by default, at Small size, with no background and no speaker names. ViceManual recommends going one size up for couch play and turning on Background. Closed Captions are a separate option.

The TechRadar review lists the accessibility options: a high-contrast shader for people and items, reduced light brightness, color streaks for the Focus trail, reduced damage taken, auto driving, simplified mini games and a tinnitus-reduction toggle in the audio settings. ViceManual adds Tap Assist, Hold Assist and Hold Delay for anyone who finds long button holds hard, plus Focus Trail Colorblind Mode.

If you stream, turn on Mute Licensed Music in the Audio tab to silence the licensed songs on the radio. Dialogue has its own volume slider.

GTA 6 Best Settings: Motion Blur, Aim Assist, Subtitles and More

Frequently asked questions

Does GTA 6 have a performance mode or 60fps?

No. According to ViceManual, the PS5 Display tab has no quality mode, no performance mode and no frame rate option. Rockstar told Wccftech the game targets 30fps on this console generation.

How do I turn off motion blur in GTA 6?

Settings → Display → Motion Blur Strength, slide it to 0. The default is 3. BGR recommends 0, while ViceManual suggests 1 or 2 so camera turns at 30fps don't look choppy.

How do I get GTA 5 controls back in GTA 6?

Open Settings, go to the first tab, Control Scheme, and use the D-pad to switch from Default to Classic. Sprint moves back to X/A, jump to Square/X, crouch to L3 and melee to Circle/B (GameRant, GamesRadar+).

How do I make subtitles bigger in GTA 6?

In the UI tab: Size (Small by default, three steps), Background (off by default) and Speaker Names. Subtitles itself defaults to Mission Only (ViceManual).

Can you turn off the vignette or film grain?

Not the vignette: Rockstar told Wccftech it's an artistic choice with no toggle. ViceManual's list of Display options has no film grain or chromatic aberration setting either.

Does GTA 6 have difficulty settings?

No, GameSpot confirmed, and suggested adjusting the aiming settings instead. ViceManual and iGeeksBlog point to Accessible Combat and Reduced Vehicle Damage in the Gameplay tab as other ways to make things easier.

Sources